Suzhou Lily Tech. CO., Ltd.
Page 2, Total 7 Pages
Display information
Icon
Function
On
Blink
Off
Heat output (R3)
Energized
Keeping de-energized because
of delay protecting
(ref.
【
t2
】
,
【
h2
】
)
De-energized
Cool output (R3)
Humidify output (R2)
Dehumidify output (R2)
Multifunction output (R1)
Energized by timer
Energized by over hot / wet
Timer output (R4)
Energized
R4 and R5 flipped times has
reached
【
u2
】
Timer output (R5)
Celsius
Celsius value
Setting temperature
Relative humidity
Humidity value
Setting humidity
Alarm
Alarming
No alarming
Maintenance
Has fault
No fault
E01
Sensor failure
Sensor failure alarm
tHi
Temperature high alarm point
High temperature alarm
tLo
Temperature low alarm point
Low temperature alarm
hH
Humidity high alarm point
High humidity alarm
hL
Humidity low alarm point
Low humidity alarm
Lo
Keypad locked
Keypad locked
Un
Keypad unlocked
Keypad unlocked
UnL
Restore to factory
default settings
Restoring to
default settings
Operation
On/Off
Keep key
〖
〗
depressed for 2 seconds to switch the controller between online and offline.
When in offline status, display “OF “.
Set temperature and humidity
Factory default setting: temperature is 37.8
℃
, humidity is 60%RH.
Press key
〖
S
〗
to enter into/exit temperature and humidity setting status.
At the setting status, display shows “set-value TP” or “set-value HP”.
Press
〖
〗
to switch between temperature setting (TP) and humidity setting (HP).
Press
〖
▲
〗
or
〖
▼
〗
to set the value. Keep depressed could fast set.
Keep
〖
S
〗
for 2 seconds to save the settings and exit the setting status.
The setting status will exit
without
saving the settings if there is no key operation for 15 seconds.
