B. SLOW
Low-speed shutter control is activated when UMS zones are reached.
As for the accumulated time when slow control is initiated, the staring
shutter speed is as set in SHUT SPD MIN in the electronic shutter
control mode (EXPOSE MODE=AUTO, WDR) or as selected in
SHUTTER SPD when electronic shutter control is manual (EXPOSE
MODE=MANUAL). For fixed-shutter flickerless operation, the starting
point is NTSC=1/100 or PAL=120.
C. Press [SET] key to display the AGC SLOW SETUP or SLOW SHUT
SETUP menu.
D. Select SLOW SHUTTER by using [LEFT/RIGHT] key.
Slow Shutter Mode changes as follows:
02
03
05 ...... 20
40
80
160
320
510 FLD
SLOW SHUT SETUP
SLOW SHUTTER
RET
05
AGC SLOW SETUP
AGC MAX
SLOW SHUTTER
RET
MID
05
3. OFF
Disable control in UMS zone.
12
NOTE
The low-speed shutter control offers the optimal brightness level by
increasing the number of stored fields of the CCD in response to
brightness level. Compared to AGC control, Low-Speed shutter offer less
noise even in conditions of low-brightness, but longer stored fields will
lead to diminished dynamic resolution.
