NOTES
IR CUT REMOVE
Position the cursor beside IR CUT REMOVE and select desired item.
IR Cut Remove Mode changes as follows:
AUTO
IN
OUT
SCHEDULE
EXTCTRL
1. Position the cursor beside IR CUT REMOVE and select AUTO by using
[LEFT/RIGHT] key.
2. Press [SET] key to display the ICR AUTO
menu.
3. Position the cursor beside IN LUX LEVEL
and select Level by using [LEFT/RIGHT] key.
When light level is higher than IN LUX
LEVEL, IR Cut Filter switches ON
automatically to produce color image.
IN LUX LEVEL: 20~30 (about 20Lux ~ 30Lux)
4. Position the cursor beside OUT LUX LEVEL and select Level by using
[LEFT/RIGHT] key.
When light level drops below OUT LUX LEVEL, IR Cut Filter switches
OFF automatically to produce B/W image.
OUT LUX LEVEL: 5~15 (about 5Lux ~ 15Lux)
5. Position the cursor beside DELY TIME and select Delay Time by using
[LEFT/RIGHT] key.
The color and B/W mode switch delay time prevents the image turning
from color to B/W or B/W to color too quickly under unstable light
condition.
DELAY TIME: 00~10 Sec.
6. Position the cursor beside RET and press [SET] key and return to
SETUP MENU 2/2.
AUTO
1
ICR AUTO
IN LUX LEVEL
OUT LUX LEVEL
DELAY TIME
RET
25
10
02 SEC
20
1. Please don't set the value of IN LUX LEVEL and OUT LUX LEVEL too close or
it may case Hunting phenomenon. Recommend to set at least 15Lux different.
