Low Lux Mode Setting
The purpose of Low Lux Mode parameters
is to improve low-brightness zones that
make control of the electronic shutter and
mechanical iris difficult.
Thus, under minimum shutter speed (UMS)
can improve the situation.
1. AGC (Automatic Gain Control)
AGC control is activated when UMS zones reached. The maximum gain
can also be switched among 3 gain levels in AGC gain setting.
2
AUTO EXPOSE
SHUT SPD MIN
SHUT SPD MAX
LOW Lux MODE
BACK LIGHT
RET
1/60
1/500
<AGC>
OFF
AGC
AGCSLOW
OFF
SLOW
Position the cursor beside LOW Lux MODE and select desired item.
Low Lux Mode changes as follows:
A. Press [SET] key to display the AGC SETUP MENU.
B. Select AGC MAX (Gain level) by using [LEFT/RIGHT] key.
Gain Level changes as follows:
LOW
MID
HIGH
AGC SETUP
AGC MAX
RET
MID
LOW
MID
HIGH
: Select lower gain control.
: Select normal gain control.
: Select Higher gain control.
2. AGCSLOW & SLOW
A. AGCSLOW
Activates both low-speed shutter control and AGC control.
When UMS zones are set, low-speed shutter control is activated first,
then switched to AGC control after the maximum number of stored
fields reached.
11
If IR CUT REMOVE set as "AUTO", details of Low Lux Mode setting please refer
to AUTO NOTES of IR CUT REMOVE.
NOTE
