4. Position the cursor beside RET and press [SET] key and return to SETUP
MENU 1/2.
AUTO IRIS LENS
DC (Direct Drive)
1
1. Position the cursor beside AUTO IRIS LENS
and select DC by using [LEFT/RIGHT] key.
2. Press [SET] key to display the DC IRIS
menu.
3. Adjust IRIS LEVEL value by using [LEFT/
RIGHT] key.
IRIS LEVEL: 106~160.
4. Position the cursor beside RET and press [SET] key and return to SETUP
MENU 1/2.
DC IRIS
IRIS LEVEL
RET
128
VIDEO (Video Signal Drive)
2
Position the cursor beside AUTO IRIS LENS and select VIDEO by using
[LEFT/RIGHT] key.
If using auto iris lens please don't set the iris level of lens in very low level or it may
case Hunting phenomenon or failure on Auto function of IR CUT REMOVE (Color
mode / Mono mode image can not switch).
18
NOTES
1. NTSC
LL PHASE adjustment range 00~524(Each step is about 0.69 and
the range is from 0 to 360 ).
2. PAL
LL PHASE adjustment range 00~624(Each step is about 0.58 and
the range is from 0 to 360 ).
NOTE
