6
ON
OFF
RS-485 Communication Mode Selection
DIP SWITCH
2 wiring system (HALF duplex)
4 wiring system (FULL duplex)
3
OFF
ON
Communication Mode of HALF: Most of systems use this mode because of low-cost and
easy setup, but this mode can't receive and transmit data simultaneously.
Communication Mode of FULL: This Mode can receive and transmit data simultaneously.
Transmission Speed Setting
Remark: LILIN Protocol control mode is N, 8, 1 Baud Rate: 9600bps
BAUD RATE SELECTION
DIP SWITCH
2400 bps
4800 bps
9600 bps
19200 bps
5
ON
ON
OFF
OFF
4
ON
ON
OFF
OFF
Protocol Setting
Remark: LILIN MLP1 (MERIT LILIN PROTOCOL 1) is same as PIH-717 Fast Dome Protocol
MLP2 (MERITLILIN PROTOCOL 2) is the new protocol for controlling fast
dome cameras. The protocol contains 7 bytes which include a check-
sum byte and extra control codes. The check-sum byte, for example,
can prevent RS-485 interference affecting a protocol. The extra control
codes, for example, can provide the feature of controlling absolute
position of a fast dome camera. Please refer to MERIT LILIN
PROTOCOL2 (MLP2) for detail of command format.
PROTOCOL SELECTION
DIP SWITCH
MLP2 (MERIT LILIN PROTOCOL 2) VERSION
MLP1 (MERIT LILIN PROTOCOL 1) VERSION
8
ON
9
ON
ON
ON
7
ON
ON
9
RS-485 Protocol DIP Switch of LILIN Outdoor D/N WDR 700TVL Fast Dome (IP) Camera /
Outdoor Human Tracking Fast Dome Camera Series Setting
3
OFF
OFF
1
ON
ON
ON
RS-485 Protocol DIP Switch Setting
DIP SWITCH
MLP2 Version
MLP1 Version
10
2
4
5
6
7
9
OFF
ON
ON
OFF
ON
ON
OFF
ON
8
ON
ON
ON
OFF
OFF
ON
ON
