Pull-in control is exercised at all times independently of the pull-in frame which
was set by the pre-white balance adjustment.
(3) HLC Setting (High Light Compensation):
Push joystick down to select <HLC>, and then press
key into HLC setting menu.
1
.
HLC (High Light Compensation):
Push joystick down to select <HLC>, and then
push joystick left or right to make selection.
2. CLIP LEVEL:
Push joystick down to select <CLIP LEVEL>, and then push joystick left or right to
make selection.
Clip level ranges are 0 ~ 255 (Black ~ White).
3. SCALE:
Push joystick down to select <SCALE>, and then push joystick left or right to make
selection.
Scale control ranges are 0 ~ 14 (Low ~ High).
Note
:
Color rolling suppression (HIGH LUM. MODE = SHUT).
HLC SETTING
HLC
CLIP LEVEL
SCALE
BACK EXIT
OFF
0
10
C.SET
CTRL1
AUTO
→
OFF
Push joystick down to select <DAY/NIGHT>, and then push joystick left or right to select
mode.
(4) Day/Night Setting
AUTO
→
SCHED.
→
DAY
→
NIGHT
45
This mode suppresses the color rolling which arises when there are slight deviations
between blinking frequency of non-inverter fluorescent lights and the drive frequency
of the image sensor devices.
5. ANTICR:
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
produce color image. When light drops below 5 lux, camera switches NIGHT
automatically to produce monochrome image. Under monochrome mode,
sensitivity is increased to 0.01 lux and can be used with IR illuminators.
SCHED.: DAY/NIGHT switches automatically between Day mode and Night mode by
schedule of time setting.
When selection is <SCHED.>, press
key into DAY/NIGHT Setting menu.
Push joystick down to select <DAY
→
NIGHT>, and then press
key into time
setting. Push joystick left or right to select time of DAY
→
NIGHT. Then press
key again to next item.
18 : 00
→
→
18 : 00
→
→
18 : 00
AUTO: When light level is over 10 lux, camera switches DAY automatically to
