Lika Posicontrol LD220 Series, User Manual, Page: 34 / 100

LD220
6 – Menus and parameters
The serial interface with a PC and the operating software OS are used for the
parametrization of the device. The software is free and can be downloaded from
Lika's web site.
6.1 Overview of the structure
The following tables offer an overview of the menus and their relevant
parameters. The menu names are printed in bold and the associated parameters
are listed under the menu name. Depending on the device model and the
selected operation mode, only the available menus / parameters are shown.
NOTE
In the pages that describe the menus, the default values are highlighted with
grey background.
General menu , see the “6.2 General menu” section on page 39
Linearization mode
, see on page 39
Pin preselection , see on page 39
Pin parameter
, see on page 39
Factory settings
, see on page 39
SSI properties menu
, see the “6.3 SSI properties menu” section on page 41
Mode , see on page 41
Encoder resolution
, see on page 41
Bit per revolution , see on page 41
Data format
, see on page 41
Baud rate
, see on page 42
High bit
, see on page 42
Low bit
, see on page 42
Direction
, see on page 42
Error bit
, see on page 43
Error polarity , see on page 43
Encoder supply
, see on page 43
MAN LD220 E 1.4.odt 6 – Menus and parameters 34 of 100