LD220
Skip Min / Max
The display window for the maximum / minimum
values is skipped.
Diagnostic display
By means of this parameter the double display without units can be used as a
diagnostic window. When the diagnostic window is activated, the top line
shows the current SSI value in the revolution of the encoder (counts per
revolution) while the bottom line shows the total number of revolutions already
executed (number of revolutions).
0 NO
Diagnostic window is deactivated
1 YES
Diagnostic window is activated
NOTE
If the diagnostic window is deactivated, the process values set in
and
(see on page 79) is also shown in the double display
without units.
MAN LD220 E 1.4.odt
6 – Menus and parameters
82 of 100
