Lika Posicontrol LD220 Series, User Manual, Page: 39 / 100

LD220
6.2 General menu
The default values are highlighted with grey background.
Linearization mode
This parameter activates and sets the linearisation function. See the “6.15
Linearization menu” section on page 83 and the “6.15.1 Description of the
linearisation function” section on page 84.
0 OFF
No linearisation
1 1 QUADRANT Linearisation using 1 quadrant (see on page 84).
2 4 QUADRANT
Linearisation using 4 quadrants (see on page 84).
Pin preselection
This parameter allows to set the PIN code to lock the quick start of the
Preselection values
menu used to enter the preselection values, see the “5.2
Screen structure during operation” section on page 30. Refer also to the “6.6
Preselection values menu” section on page 60. The Master PIN is 6079.
This lock function is only useful if used along with the lock function set in the
Pin parameter
.
0000 No lock
...
9999 Access after entering PIN Code 9999
Pin parameter
This parameter sets the PIN code for lock function of all parameters. The Master
PIN is 6079.
0000 No lock
...
9999
Parametrization of the unit after entering PIN code
9999
Factory settings
At any time you can return all settings to the factory default values.
Default values are highlighted with grey background in this manual.
WARNING
This action will reset all parameters to factory default values and customised
settings will be lost. After reset you will have to repeat your individual set-up
procedure.
MAN LD220 E 1.4.odt 6 – Menus and parameters 39 of 100