Page 82 / 109
6. Using the WEB interface
6.1.
Accessing the router’s web page
Lightware matrices have a built-in web page, which can be accessed over TCP/IP
protocol and offers you full control over all settings even if you don’t have the
opportunity to install new programs. The router web is compatible with most widely
spread browsers and requires no additional software components such as ActiveX
controls. The web interface functionality has been tested and confirmed with the
following browsers:
Mozilla Firefox 2 and 3 (recommended)
Internet Explorer 6, 7 and 8
Opera 8 and 9
Safari 3
Google Chrome 2.0
Note:
The web page is not compliant with Google Chrome 1.0.
To access the webpage just run your preferred web browser and type the IP
address of the router as URL.
Note:
Only one opened web page is allowed simultaneously. Other TCP/IP connections
are prohibited while the web page is opened. Using more instances of the web
page simultaneously will result in inadequate operations.
6.2.
Manage crosspoints and presets
After starting the web page, the crosspoints screen appears by default according to
the input and output numbers of the router. Columns represent the inputs while the
rows are the outputs. Each green square represents a valid connection. New
connections can be made by clicking on the desired gray square.
The labels of the inputs and outputs are colored depending on the port status. The
legend is the same as described in section 5.2.2 on page 70.
Summary of Contents for MX8x8DVI-HDCP-Pro
Page 108: ...Page 108 109 NOTES ...
