25
1. Overview
2. Setup & Use
3. Optional
Accessories
4. T
roubleshooting
5. W
arranty
, Safety
& Specifications
8. SETUP AND OPERATION OF REDMIKE
Once the REDMIKE is charged, follow these steps to set it up for use.
1. Turn the CAT 860 power on. The
blue LED will glow.
2. Remove the REDMIKE from the
charging cradle and turn it on.
3. Slip the REDMIKE with lanyard
around the neck and position the
top of the microphone just below
the collarbone. NOTE: Positioning
of the REDMIKE is critical for
proper volume adjustment.
4. While speaking in a normal voice
slowly increase the volume of the
corresponding channel on the
CAT 860 until your voice is barely
audible. Each REDMIKE has its
channel pre-set to either A or B, as
indicated on the back of the Mic.
REMEMBER: This equipment
supplements the user’s voice
so they are able to speak in a
conversational tone. Having the
volume set too high will result in
feedback and listener fatigue.
5. Once initial volume level is set,
walk around the room and listen
for audio dropout and overall
audio quality. Fine-tuning the
audio is accomplished by making
minor adjustments to the 4-Band
Equalizer on the back panel of the
CAT 860.
6. If a second REDMIKE was
purchased, repeat steps 2-4.
Summary of Contents for CAT 860
