Lightspeed CAT 860 User Manual Download Page 11

Page: 11 / 88

1. Overview

2. Setup & Use

3. Optional

Accessories

4. T

roubleshooting

5. W

arranty

, Safety

& Specifications

860

FRONT PANEL CONTROLS

1. POWER SWITCH/INDICATOR:

Press this button to turn the CAT
860 ON (pushed in) or OFF. When
the POWER is switched on, the
blue LED indicator will light.

2. AUDIO INDICATORS:

These

lights flash red when audio (voice)
from the microphone is detected.

3. A VOLUME:

Controls the volume

of the teacher microphone (set to
channel A).

4. B VOLUME:

Controls the volume

of the student or second teacher
microphone (set to channel B).

5. AUDIO INPUT VOLUMES:

Control the volume of the audio
coming from the media source
(computer, TV/VCR, CD/DVD, etc.)
connected to the corresponding
input on the rear panel.

6. ALD OUTPUT AND VOLUME:

This jack sends mixed audio to
external equipment such as an
assistive listening device (Personal
FM System) or recording device.
Use the volume control to set
the optimum signal level for the
device.

Summary of Contents for CAT 860

























































































Search results

Summary of Contents for CAT 860

Reviews:

Related manuals for CAT 860

Brands by name

Popular brands

Lightspeed CAT 860, User Manual

Search results

Summary of Contents for CAT 860

Reviews:

Related manuals for CAT 860

Brands by name

Popular brands