![background image](http://html1.mh-extra.com/html/lightronics/tl-112/tl-112_owners-manual_1914918004.webp)
OWNERS MANUAL
Page 4 of 5
TL - 112 MEMORY CONSOLE
Revision
1.0
05/12/2002
www.lightronics.com
Lightronics
Inc.
509
Central
Drive
Virginia
Beach,
VA
23453
TEL
757
486
3588
Chase Mode:
In this mode a series of light patterns is automatically sent to the dimmers. Up to 12 chase patterns
can be created by the operator. The chase step rate and step fade time may also be controlled Step times may be
set quite long. This will result in what appears to be an automatic slow scene progression. Specific Instructions for
creating and playing chases are provided further on in this manual.
RECORDING SCENES
1) Adjust the MANUAL SCENE faders to the desired levels (create the scene).
2) Push “SCENE BANK” to toggle to the desired scene bank (A or B).
3) Press "RECORD".
4) Press the momentary button (1 -12) below the fader you wish to record the scene to.
SCENE BANK SCENE PLAYBACK
NOTE:
The “CROSS FADER” must be in the MEMORY position to activate preset scenes.
1) Push “SCENE BANK” button to toggle to the desired (A or B) scene bank.
2) Push the momentary button (1-12) for the scene you want to activate.
SCENE FADE RATE
The fade rate for scenes may be set between 0 and 12 seconds and applies universally to all preset scenes.
The scene fade rate may be set at anytime .
1) Push “FADE RATE”. The FADE RATE indicator will light.
2) Push one of the momentary buttons (1-12) to set the rate. The left button is 1 second. The right one is 12 seconds.
You can set a 0 second fade rate (instant on) by pushing the momentary button which has its indicator lighted.
3) Once you have selected a fade rate - push “FADE RATE”. The FADE RATE indicator indicator will go out and the
unit will return to normal operation.
RECORDING CHASES
1) Press "RECORD", the record LED will begin flashing.
2) Press "CHASE" to activate the momentary buttons (1-12) as chase number selectors.
3) Press a momentary button (1-12) to select the chase number for recording.
4) Create the chase step pattern (scene) for the first chase step using the MANUAL SCENE faders.
5) Press "RECORD" to store the created scene as the first chase step.
6) Repeat steps 4 and 5 for the next and following steps until all desired steps are recorded (up to 12
steps).
7) Press the momentary button (1-12) for the chase being programmed to end the recording process. If you record
all 12 steps then Press the "CHASE" button to end the recording process.
CHASE PLAYBACK
1) Press the "TAP" button 3 or more times at the desired rate to set the chase speed.
2) Press "CHASE" to activate the momentary buttons as chase number selectors.
3) Press the momentary button (1-12) for the chase you want to activate. The chase will begin running.
The chase step fade time is controllable as follows: While the chase is running - move the CROSS FADER to set a
fade time (Up = faster) then push “CHASE FADE RATE” to read the fader and lock in the rate.
To turn off a chase: Push “CHASE”. The Chase indicator and one of the momentary indicators will be lighted. Push
the momentary button associated with the indicator. The chase will stop and the indicator will go out. Push “CHASE”
to deselect chase setup. The amber chase indicator will go out. The “BLACKOUT” function will inhibit chases when it
is active.