OWNERS MANUAL
Page 3 of 5
TL - 112 MEMORY CONSOLE
Revision
1.0
05/12/2002
www.lightronics.com
Lightronics
Inc.
509
Central
Drive
Virginia
Beach,
VA
23453
TEL
757
486
3588
TL - 112 FACE VIEW
OPERATING MODES
The TL - 112 has 3 basic modes of operation: (1) Two Scene Manual Mode. (2) Preset Scene Mode. (3) Chase
mode.
Two Scene Manual Mode:
Start by moving the “CROSS FADER” up (to the MANUAL position). The upper 12
faders will control the output channels. If you push “COPY MANUAL TO MEMORY” the fader settings will be stored
by the unit. At this point you can move the “CROSS FADER” to the MEMORY position. The channel information is
now being provided by the memory data which you copied from the faders. The 12 upper faders can now be moved
without disturbing the output channels since the memory is now providing the channel information. Now you can set
your next scene or channel settings on the upper 12 faders. When you move the “CROSS FADER” back up to the
MANUAL position - the unit will again take its channel information from the faders. By proceeding this way you can
always create your next scene and then fade to it with the CROSS FADER
The “COPY MANUAL TO MEMORY” function records at the end of the currently set scene fade rate. You must leave
the “MANUAL SCENE” faders in a stable state for this duration or you may not record the scene correctly.
Preset Scene Mode: In this mode you can activate a series of up to 24 scenes which you have programmed or
preset ahead of time. The inter-scene fade rate is controllable and you can activate the scenes in any desired order.
Specific scene recording and playback instructions are given further on in this manual.