![background image](http://html1.mh-extra.com/html/lightronics/tl-112/tl-112_owners-manual_1914918002.webp)
OWNERS MANUAL
Page 2 of 5
TL - 112 MEMORY CONSOLE
Revision
1.0
05/12/2002
www.lightronics.com
Lightronics
Inc.
509
Central
Drive
Virginia
Beach,
VA
23453
TEL
757
486
3588
IMPORTANT:
Please take time to read this manual before
operating the TL-112 Control Console
DESCRIPTION
The TL-112 is a compact, portable, digital dimmer controller. It provides 12 channels of LMX (industry standard
multiplex) control on a 3 wire cable. It can optionally provide DMX output. The TL-112 operates in a 2 scene manual
mode or can provide 24 preset scenes organized in 2 banks of 12 scenes each. Twelve user defined chase patterns
are always available. Scene fade rate, chase rate and chase fade rate are user controlled. Audio may also be used
as a chase rate control. Other features of the TL - 112 include: Master fader, momentary buttons, and blackout
control.
INSTALLATION
The TL - 112 control console should be kept away from moisture and direct sources of heat. The unit is intended for
indoor use only.
Connect the unit to a Lightronics (or compatible) dimmer using a multiplex control cable with 3 pin XLR connectors.
The TL - 112 is powered by the dimmer which it is connected to. It may also be powered via an optional external
power 13 VAC supply. If you are using audio for chase control - ensure that the microphone holes on the back of the
unit are not covered.
You should check the address settings of the dimmers before proceeding with TL - 112 operation.
CONTROLS AND INDICATORS
MANUAL SCENE faders:
Control individual channel levels
CROSS FADER:
Controls selection of faders or stored manual scenes.
COPY MANUAL TO MEMORY Transfers fader settings to memory.
Momentary buttons:
Activate associated channels at full intensity while pressed. Also used
for
chase
and
scene
selection.
TAP button:
Press three or more times at desired rate to set chase speed
TAP indicator:
Shows the chase step rate
BLACKOUT button:
Turns on and off console output from all scenes, channels and chases
BLACKOUT indicator:
Lighted when blackout is active.
MASTER fader:
Adjusts output level of all console functions
RECORD button:
Used for recording scenes and chase patterns
RECORD Indicator:
Flashes when Chase or scene recording is active.
AUDIO control:
Adjusts chase sensitivity to internal audio microphone.
AUDIO Indicator:
Indicates that audio chase control is active.
FADE RATE button:
Enables momentary button use as fade rate selection controls.
CHASE button:
Enables momentary buttons use as chase number selection controls.
SCENE BANK button:
Toggles between scene banks A and B.
CHASE FADE RATE:
Reads the CROSS FADER setting as a chase fade rate setting.