background image

 

 

 
 
 
 
 
 
 
 

This product is warranted for a period of TWO YEARS from the date of purchase against 
defects in materials and workmanship. 

 
 
 

This warranty is subject to the following restrictions and conditions: 

 
A)  If service is required, you may be asked to provide proof of purchase from an 
 

authorized   Lightronics dealer. 

 
B)  This warranty is valid only for the original purchaser of the unit. 
 
C)  This warranty does not apply to damage resulting from abuse, misuse, accidents, 
 

shipping, and repairs or modifications by anyone other than an authorized 

 

Lightronics service  

representative. 

 
D)  This warranty is void if the serial number is removed, altered or defaced. 
 
E)  This warranty does not cover loss or damage, direct or indirect arising from the use 
or   inability to use this product. 
 
F)  Lightronics reserves the right to make any changes, modifications, or updates as 
 

deemed  appropriate by Lightronics to products returned for service.  Such changes 

 

may be made  

without prior notification to the user and without incurring any 

 

responsibility or liability for modifications or changes to equipment previously 

 

supplied.  Lightronics is not responsible for supplying new equipment in accordance 

 

with any earlier specifications. 

 
G)  This warranty is the only warranty either expressed, implied, or statutory, upon 
which   the equipment is purchased.  No representatives, dealers or any of their agents 
are  authorized   to make any warranties, guarantees, or representations other than 
 

expressly stated herein. 

 
H)  This warranty does not cover the cost of shipping products to or from Lightronics for 
 

service. 

 
I) 

Lightronics Inc. reserves the right to make changes as deemed necessary to this 

 

warranty without prior notification. 

 
 
 
 

 

 

Lightronics Inc. 

 

 

 

 

 

 

 

 

 

509 Central Drive Virginia Beach, VA 23454 

 

 

 

 

 

 

  20100211

 

WARRANTY

 

Summary of Contents for AT SERIES











Reviews: