Page 8 of 10
AT SERIES ARCHITECTURAL DIMMER
Revision 0.3
OWNERS MANUAL
03/16/2020
www.lightronics.com
Lightronics Inc.
509 Central Drive Virginia Beach, VA 23454
Tel 757 486 3588
TO SET THE INDIVIDUAL PRESET UP/DOWN FADE TIMES (or skip this section).These settings will over-ride
the fade up/down settings in the previous section.
SYMBOL
FUNCTION
VALUE
.A1
Channel 1, Preset A - up fade time
1-99 seconds
A1
Channel 1, Preset A - down fade time
1-99 seconds
.b1
Channel 1, Preset B - up fade time
1-99 seconds
b1
Channel 1, Preset B - down fade time
1-99 seconds
.C1
Channel 1, Preset C - up fade time
1-99 seconds
C1
Channel 1, Preset C - down fade time
1-99 seconds
.d1
Channel 1, Preset D - up fade time
1-99 seconds
d1
Channel 1, Preset D - down fade time
1-99 seconds
.A2
Channel 2, Preset A - up fade time
1-99 seconds
A2
Channel 2, Preset A - down fade time
1-99 seconds
.b2
Channel 2, Preset B - up fade time
1-99 seconds
b2
Channel 2, Preset B - down fade time
1-99 seconds
.C2
Channel 2, Preset C - up fade time
1-99 seconds
C2
Channel 2, Preset C - down fade time
1-99 seconds
.d2
Channel 2, Preset D - up fade time
1-99 seconds
d2
Channel 2, Preset D - down fade time
1-99 seconds
.A3
Channel 3, Preset A - up fade time
1-99 seconds
A3
Channel 3, Preset A - down fade time
1-99 seconds
.b3
Channel 3, Preset B - up fade time
1-99 seconds
b3
Channel 3, Preset B - down fade time
1-99 seconds
.C3
Channel 3, Preset C - up fade time
1-99 seconds
C3
Channel 3, Preset C - down fade time
1-99 seconds
.d3
Channel 3, Preset D - up fade time
1-99 seconds
d3
Channel 3, Preset D - down fade time
1-99 seconds
.A4
Channel 4, Preset A - up fade time
1-99 seconds
A4
Channel 4, Preset A - down fade time
1-99 seconds
.b4
Channel 4, Preset B - up fade time
1-99 seconds
b4
Channel 4, Preset B - down fade time
1-99 seconds
.C4
Channel 4, Preset C - up fade time
1-99 seconds
C4
Channel 4, Preset C - down fade time
1-99 seconds
.d4
Channel 4, Preset D - up fade time
1-99 seconds
d4
Channel 4, Preset D - down fade time
1-99 seconds
If individual times do not need to be set, then proceed to P2-P4 Channel Input Power Phase selection.
P2
Channel 2 Phase
A, B or C
P3
Channel 3 Phase
A, B or C
P4
Channel 4 Phase
A, B or C
c1
Channel 1 Curve
LL or IN (LED/INCANDESCENT)
c2
Channel 2 Curve
LL or IN (LED/INCANDESCENT)
c3
Channel 3 Curve
LL or IN (LED/INCANDESCENT)
c4
Channel 4 Curve
LL or IN (LED/INCANDESCENT)
