90-240VAC
90-240VAC
Output Voltage
PT-112U
Triac Wall Mount Touch Panel Dimmer
Dimension(mm)
Installation Guide
Wiring Diagram
<1A
-20-60
℃
181g
1 channels
L120XW74XH43mm
<3W
<110W(110VAC), <220W(220VAC)
Supply voltage
Net weight
Working temperature
Gross weight
240g
External dimension
Output channel
Packing size
Output Power
Static power
Output current
Trailing-edge dimming
Dimming mode
Technical Parameters
Function Description
1/1
User’s manual: 2019-9
www.euchips.com
※
The contents of this manual are updated without prior notice. If the function of the product you are using is inconsistent with the instructions, the function of the product shall prevail.Please contact us if you have any questions.
L145
X
W99
X
H53mm
Touch this slider by your finger to adjust the brightness.
1. Connect wire according to typical
application. Refer to typical application
2. Gently pry gaps in touch panel with a screwdriver, and then you can slowly remove the
panel, as shown below:
3. Mount the controller on the cassette in the wall after connecting the wire, and then nail
the screw, fix it on the wall, finally you can install the switch pedestal on the wall.
4. Buckle the glass panel to the bottom
box in the right direction
Remarks:
1. Connect the load wire at first, then connect the power wire; Please ensure short circuit
can not occur between connecting wire before you turn on the power.
2. Power supply voltage range is 90-240VAC, more than voltage range maybe will burnout
the controller.
Turn on/off this controller at any state; when the dimmer is turned on, long press
the key for 3 seconds, you can turn on/off buzzer.
Brightness reduce key. Brightness reduces 1 with each short press. With long press,
it could reduce brightness quickly until the darkest.
Brightness increase key. Brightness increase 1 with each short press. With long
press, it could increase brightness quickly until the brightest.
42mm
4mm
74mm
120mm
70mm
8mm
43mm
13mm
AC 90-240V
Triac Dimming
LED Driver
Panel
Light
INPUT
:
Two terminals, L and N, Current 1A
OUTPUT
:
Two terminals, L and N, Current 1A
Interface Definition
L
N
L
N
INPUT
OUTPUT
