LIGHTNING Instrumentation Pocket MultiCom, User Manual, Page: 20 / 48

C
HAPTER
2 G
ETTING
S
TARTED
R
EGISTERING YOUR
P
RODUCT
O
N
-
LINE
12 Pocket Multi Com — User’s Manual
R
EGISTERING YOUR
P
RODUCT
O
N
-
LINE
2.3
11. Type the following Internet Address in your Web-browser and ENTER:
http://www.lightning.ch/register.html
12. The router now opens a link to your ISP (the signal B1 or B2 lights green).
Lightning's registration page appears in the navigator. You may now enter
your registration information to validate your warranty.
If the ISDN B1 or B2 channel does not open, or the Lightning registration
page doesn’t appear, first check your parameters, and redo the configuration
starting at step 2. on page 10. If the problem persists, please refer to § 3,
"Trouble-shooting & FAQ" on page 21.
NOTE - The serial number of your Pocket MultiCom can be found on a sticker
below the Pocket MultiCom.
You will then benefit from a free firmware update and will be able to request sta-
tus updates of Lightning products. You may also use fax or mail with the Registra-
tion Card found in § 6.4 on page 39.
Congratulations, you are all done if you have a single computer. To configure fur-
ther computers using the built-in DHCP server, please refer to § 2.7, "Installation
for a Network" on page 17. If you already have fixed, static, IP addresses or need
other special configurations, please refer to § 2.5, "Configuring for Static IP
Addresses" on page 14 and to the Reference Manual on CD-ROM. To fine-tune
the configuration to use a second B-channel with MPP, read the next section.
F
INE
-
TUNING THE CONFIGURATION
2.4
For further configuration you can use the router's built-in Web server at the
router's IP address (by default
http://10.0.0.1/
), and start from examples in the
Reference Manual on CD-ROM, or use the Windows™ EasyConfig™ wizard and
its manual setup option, as explained in § 2.5.1, "Installing EasyConfig on Win-
dows 95/98/NT" on page 14.