C
HAPTER
2
G
ETTING
S
TARTED
C
ONFIGURING
FOR
S
TATIC
IP A
DDRESSES
14
Multi
Com
— User’s Manual
6.
Click on “
reboot
” to restart the
Pocket MultiCom with the new
configuration.
7.
The Pocket MultiCom restarts.
Ethernet, D-Channel and Power
leds light green again after a
while. In case of very important
traffic the router can, from now
on, open a second B-channel in
order to increase the capacity. In
this case both two leds B1 and
B2 will light green.
In order to disable the channels aggregation and use only one ISDN B-channel,
execute the same operations and reset
ISDN BChannel
to
1
instead of
2
.
C
ONFIGURING
FOR
S
TATIC
IP A
DDRESSES
2.5
The instructions from the previous sections allow to establish a standard DHCP
configuration for the connection of a local network to the Internet. You might
need a non-standard configuration, for instance if you want to use your own static
IP addresses or if you already have a DHCP server on your network. In this case,
you can use the EasyConfig wizard to establish the configuration corresponding
to your needs. This installation needs some networking expertise.
The EasyConfig wizard takes your router's actual configuration, allows you to
modify it through some simple dialog boxes and saves the modified configuration
back into the router.
I
NSTALLING
E
ASY
C
ONFIG
ON
W
INDOWS
95/98/NT
2.5.1
NOTE - EasyConfig runs also on Apple PowerMacintosh™ using the Windows
95/98 emulator “Virtual PC 2.1.2”™ (earlier versions are not fully compliant) by
Connectix™ Corp.