LIGHTNING Instrumentation Pocket MultiCom, User Manual, Page: 25 / 48

R
EFERENCE
M
ANUAL
, W
EB
,
AND
FAQ U
SING OTHER
E
XAMPLE
C
ONFIGURATIONS
Pocket Multi Com — User’s Manual 17
R
EFERENCE
M
ANUAL
, W
EB
,
AND
FAQ
2.6
A detailed description of your router capabilities can be found in the Reference
Manual on the CD-ROM. A copy of this manual has been made on your hard disk
where the MultiCom Utilities EasyConfig and EditConfig have being installed.
Please also check the Technical Support area of our Web server at:
http://www.lightning.ch/support/
for future improvements in configuration, software, and the latest list of Fre-
quently Asked Questions (FAQ). A short list of these can also be found in § 3.1 on
page 22.
I
NSTALLATION FOR A
N
ETWORK
2.7
The illustration below shows a typical LAN (Local Area Network) setup with a
Multi Com and an Ethernet Hub:
Proceed as follows:
1. Make sure that your hub or switch is working correctly.
2. Plug the straight 4-wire grey Ethernet cable into one of its Ethernet port.
HUB
Ethernet 10-base-T hub
Straight 10-Base-T Ethernet Cable
(short grey cable with 4 wires)
(without internal cross over)
or 10/100 switch