2.
Change Administrator Password
(Default:6666)
Administrator password is the key to enter the host system when need
function setting.
Press
firstly, then input 4- digit password by the keypad,input instruction
[39], and then input the 4- digit new password, and then press
to confirm.
The host emits will make a long beep and you will hear a voice prompt “setting
completed”.
Operating:
Password
[39]
[XXXX]
XXXX
indicates: the new 4-digit password
Example: change the system password to 2846
Operating:
Password
[39]
[2846]
LCD display:
Note:
The user password and the Administrator password cannot be the same.
19.Keypad lock setting(Default: Closed)
Keypad lock could ensure the host password can’t be changed maliciously.
Press
firstly, then input 4- digit password by the keypad,input instruction
[40], then input [0~1], finally press
to confirmed. The host makes a long
beep.
You will hear a voice prompt “setting completed”.
Operating:
Password
[40]
[X]
X=“0”
indicates: Keypad lock is closed. Arm/Disarm, password
don’t need to be entered
X=“1”
indicates: Keypad lock is open. Arm/Disarm, password
should be entered.
Example: Open the keypad lock.
Operating:
Password
[40]
[1]
LCD display:
20.Turning Host Timed Arm/Disarm on/off
Setting(Default: Closed)
Press
firstly, then input 4- digit password by the keypad,input instruction
[41], then choose on/off timed Arm or Disarm function key
［
1/0
］
, finally press
to confirm, The host makes a long beep.
You will hear a voice prompt “setting
completed”.
Operating:
Password
[41]
[X]
X=“0”
indicates: close all timed Arm/Disarm function.
X=“1”
indicates: Open all timed Arm/Disarm function..
Example: Indicates: Open all timed Arm/Disarm function
Operating:
Password
[41]
[1]
LCD display: