Remote Control Operation: Just press [
].
LCD display:
5. Disarm
It means to stop the alarm when the host sounds the alarm or makes the alarm
system in the state of non-warning. After disarming, even if you trigger the
detector, the host would not sound alarm (excluding 24- hour defense areas).
If keypad lock is closed, press
on keypad directly to disarm. If keypad lock is
open, press
, and follow voice prompt enter [user password, finally press
to
confirm. Disarming operation is completed.
Remote Control Operation: Press [
].
The Host Operating:
Press [
］
.
LCD display:
6.
Answer Alarm Call
When the host sounds alarm, Siren releases voice prompt at once: first, would
send out SMS, telling user which defense zone has alarm, and then it will dial
the preset numbers. If no one answers the call, the system will call the next user
number automatically. The system will call each preset numbers for 3 times in
order.
If you answer the all, you will hear the pre-record voice message . You can set
system via your telephone or mobile phone keypad.
If you hang-up directly without answering the call, system will call each preset
number for 3 times circularly.
Press [*]: listen voice recording message
Press [1]:
The host stops alarming and to Arm; it stops calling users.
Press [2]:
The host stops alarming and to Disarm; it stops calling users.
Press [3]:
The host closes Siren and monitors the scene for 30 seconds, for
continuous monitoring, press [3] again to monitor the abnormal
sounds or a burglar intrusion for another 30 seconds.
Press [4]:
start talkback 30s.
Press [6]:
Turn on the relay NO.1. (Press 6 again, turn it off).
Press [7]:
Turn on the relay NO.2. (Press 7 again, turn it off).
Press [8]:
Turn on the relay NO.3. (Press 8 again, turn it off).
Press [9]:
Turn on the relay NO.4. (Press 9 again, turn it off).
Press [#]
: Stop calling users.
7. Remote control by making call to host
The telephone (mobile) is connected to alarm host number, and after ringing
times setting, the telephone receiver prompts computer-generated voice:
“Please enter password”. The password is entered via telephone (mobile). For
wrong password, the host gives prompt: “wrong password, please enter
password again”. For correct password, the telephone receiver prompts “press
①
to arm, press
②
to disarm, press
③
to monitor, press 4 to talk ”. And after
it is accessed, phone button could be used for remote control.
Press [1]:
the host enters Arm state and voice prompts “Armed”.
Press [2]:
the host enters Disarm state and voice prompts “Disarmed”.
Press [3]:
the host enters monitoring state for 30 seconds and press [3] for 30
seconds delay repeatedly in case of continuous monitoring.
Press [6]:
Turn on the relay NO.1. (Press 6 again, turn it off).