1). whether the host normally performs Arm or Disarm.
2). whether the host normally dials up the telephone numbers.
3). whether the detector signal is received or backup battery works.
Sensor detection:
1). manually trigger the detector to check whether it sounds normal alarm.
2). Check batteries of all detectors to make sure whether it is under-voltage.
3). Check whether wireless detector is communicated with the host during
emission testing
2.
Notices
Alarm equipment, for explosion-proof design, shall not directly be used in
hazardous location with Grade I, II and III (flammable and explosive places),
otherwise it is very dangerous.
Do not dismantle, repair and modify products privately, or accidents and
failures may be caused.
Do not drop the product on the ground or hard objects to avoid strong
impact for failure and damage.
Without permit and consent from relevant department, do not directly set
"110", "119" or alarm phone number of police station as alarm phone
number of the host.
[Technical Parameters]
1.
Table one
2.
Table two
Technical Parameter
Adaptor power
：
DC12V
1000mA
Static consumption
：
≤55mA
Alarm current
：
≤450mA
Output current
：
DC12V
150mA
Wireless frequency
：
315MHz/433MHz
GSM
900/1800/1900/850Mhz
Siren volume
：
110dB
Backup battery
：
NI-MH AAA*6 7.2V DC
Temperature
：
-20
℃ ～
+55
℃
Humidity
：
40%
～
80%RH
Encoded mode:
2262 IC / 4.7MΩ
Defense zone
Arm
Home
Type
Siren
1 defense zone
effective
effective
24H
Yes
02-99 defense zone
effective
effective
Real-time
Yes
SOS
effective
effective
24H
Yes
Wired defense zone
effective
effective
Real-time
Yes
Administrator
password
6666
Remote control
On
User password
1234
Siren
Off
Siren sound time
According setting
time
Home appliance
Optional