Lighthouse Remote 2014P, Operating Manual

Page: 58 / 80

Lighthouse REMOTE 2014P, 3014P, 5014P Operating Manual
A-6 248083408-1 Rev 1
Printer Option (40049) displays the configuration of the printer
function of the instrument.
If Bit 1 of Register 40049 is set, the instrument will print the last
recorded data at the end of each sample. This feature cannot be enabled
if the One Second Data Update feature is enabled. It will be disabled if
the One Second Data Update feature is enabled.
Device Options (40050) displays the device configuration of the
instrument.
If Bit 3 is of Register 40500 is set, the number of locations available
(Register 40199) is set to 400 and Registers 40200-40999 are used for
four character names associated with location index values. For
example, the name for location 3 would be located at registers 40204-
40205.
If Bit 3 is of Register 40500 is 0, up to 200 locations can be specified.
Registers 40200-40999 are reserved for eight character names
associated with location index values. Thus the name for location=3
would be located at registers 40208-40211. Register 40199 indicates
the number of location names supported on the device.
The Command Register (40002) is used to make the device perform an
action. This register performs an action when an integer value is written
to it. The action is completed when the device sends a MODBUS
response. When this register is read, it always returns a zero.
Table A-4 Printer Options
Bit Description
0 Unused - Non-writable
1 Print on sample (1 - Enabled, 0 - Disabled)
2-15 Reserved
Table A-5 Device Options
Bit Description
3 Number of Locations (1-400 locations with 4 character
names, 0-200 locations with 8 character names)