Lighthouse Remote 2014P, Operating Manual

Page: 30 / 80

Lighthouse REMOTE 2014P, 3014P, 5014P Operating Manual
3-10 248083408-1 Rev 1
6. Identify the computer port that has been added to the PC by using
the “Properties” of My Computer and examining the COM ports.
USB ports are generally added to the bottom of the list and named
USB COM port ’x’. Refer to Figure 3-6 for screen examples
(Windows XP).
Figure 3-6 Example Device Manager Screens
Use LMS XChange or one of the LMS Express products to connect to
the instrument and retrieve data from it. Use the port assignment
determined above.
Ethernet
Configuration The REMOTE P comes pre-configured to use
DHCP and receive an IP address
automatically. If this is not a desired
configuration, use this section to change
these settings.
If you do not understand these terms or the
possible impact of changing the REMOTE’s
settings, do NOT proceed without contacting
your facility’s IT personnel.
The following procedure requires pre-
approval and planning by the IT department
and a joint setup effort.
After port is added
Before port is added
Device Manager
Screen