Light Efficient Design breezEV EVC-L2-D Series, Install Manual

Page: 26 / 30

3 June 2022 Page | 26
CABLE MANGEMENT PEDESTAL INSTALLATION
Follow all installation steps above to properly mount the base plate, mount the lower pedestal section and
complete all electrical wiring.
Once the above steps are complete, continue to add the Upper Cable Management Pedestal section:
1. If the cable management section has not yet been assembled, see photos below for assembly. Note that in
the image on the right below, you can see 2 cable tensioners are mounted, both facing the same direction
(Scenario A). While 2 cable tensioners are provided, if only 1 charger is going to be installed to the pedestal
(Scenario B), the 2
nd
tensioner does NOT need to be installed, it can simply be disposed of. In an installation
with back-to-back chargers on either side of the pedestal, you would flip the orientation of 1 one of the
cable tensioners so that they are facing opposite directions (Scenario C).
Scenario A: 2 chargers side-by-side Scenario B: 1 charger Scenario C: 2 chargers back-to-back
2. Once the cable management section has been completely assembled with cable tensioners installed, lift it
on top of the lower pedestal section and secure with bolts to at location shown in red arrow below.