Light Efficient Design breezEV EVC-L2-D Series, Install Manual

Page: 14 / 30

3 June 2022 Page | 14
Electrical Connections
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an
equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that
is professionally installed and grounded in accordance with all local codes and ordinances.
WARNING – Improper connection of the equipment-grounding conductor could result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the product is properly grounded.
AVERTISSEMENT - Une mauvaise connexion du conducteur de mise à la terre de l'équipement peut entraîner un
risque de choc électrique. Vérifiez auprès d'un électricien ou d'un technicien qualifié si vous n'êtes pas sûr que le
produit soit correctement mis à la terre. Ne modifiez pas la fiche fournie avec le produit - si elle ne rentre pas dans
la prise, faites installer une prise appropriée par un électricien qualifié.
WIRING INSTRUCTIONS
1. Open front cover of charger by unscrewing the 13 fixed screws on the rear of the charger.
2. Adjust the adjustable amperage dial switch for the proper desired setting based on the power feed
available . The factory default setting of this switch is the slowest charge speed of 16A .
IMPORTANT : We offer both 40A and 48A cable sets. Ensure that the dial switch is set no higher than 40A
for a 40A cable set. Only the 48A cable set can handle the full 48A. Overheating and/or permanent damage
can occur if this direction is not followed.