Light Efficient Design breezEV EVC-L2-D Series, Install Manual

Page: 22 / 30

3 June 2022 Page | 22
Installation of Chargers to the Pedestal
1. Remove the front cover of the charger housing following the directions shown on p14.
2. Remove mounting bracket from the back of the charger housing and install to pedestal using provided
hardware, or in the case of a side-by-side install, install to the side-by-side mounting bracket.
3. Install the back of the charger housing to the mounting brackets on the ground, to help hold them in place
during the following steps.
4. Install the incoming power wire liquid tight fittings and liquid tight as described on p15. IMPORTANT
NOTE: If you are performing a side-by-side install, we recommend that you use the 2 inside positions for the
incoming power wires and the 2 outer sides for the charging cable sets. This will result in a more symmetrical
and cleaner install appearance. This means that the wires will be crisscrossed inside 1 of the chargers, this is
acceptable.