Liftup A/S
| Hagensvej 21 | DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
17
USER MANUAL
–
RAIZER
–
EN VERSION 03.02
3.
Press here (arrow down) to drive the
Raizer
downwards.
It will only run for as long as the button is
activated.
4.
Press the stop button to deactivate the
Raizer. All movement functions will be
turned off.
Turn the stop button in the direction of
the arrows to reactivate the device.
5.
The LED will be lit green when the device
is more than 20% charged up.
Note
During operation with a load the LED can
change to red
–
this is normal.
6.
The LED will be lit red to indicate a
battery capacity of below 10%.
In this state a max. of 0-5 lifts is left in the
battery. You should/must recharge the
Raizer (see section 11).
9.6
Operation of the Raizer by means of remote control
1.
Press here (arrow up) to drive the chair
upwards. It will only run for as long as the
button is activated.
Note
In order to operate the remote control*,
the Raizer must be turned on (by a light
press of the up/down arrows on the side
of the chair).
2.
Press here (arrow down) to drive the
chair downwards. It will only run for as
long as the button is activated.
* Supplementary equipment
