Liftsafe Fall Protection RoofGuard HG-KIT-08, User Instruction Manual

Page: 11 / 28

Vertical posts are supplied with fittings and caps for a variety
of configurations: Each “Post” is labelled with a letter sticker to
identify where it is used in the kit.
A-POST-END: Used at end of counterweighted tieback (return) (2 in
each kit)
B-POST-CORNER: Used where leading edge rails join up to tieback
(return)
(2 in each kit)
E-POST-VAR: Used in the 18-foot and 27-foot kits to make a
straight sections, or with an angle (such as at a corner of a rooftop)
(1 in RGC-KIT-18V) & (2 in RGC-KIT-27V).
X-POST-INT: Used where 9-foot sections of rail join together (1 in
RGC-KIT-18V) & (2 in RGC-KIT-27V)
Z-HATCH SUPPORT: This horizontal piece is used in the Hatch Kit
to keep the two sides of the hatch parallel as one end is open for
the gate. (1 in HG-KIT-08)
The self-closing gate is hot-dip galvanized for corrosion resistance
and durability.
Horizontal Rails are available in three standard sizes: 6-foot,
9-foot and 4-foot (for HatchGuard). For other required sizes, the
aluminum pipe is suitable for
cut-to-fit on-site with various tools for non-ferrous metals.
4-foot sections are included for the 3 sides of the HatchGuard
Kit (6pcs per HG-KIT-08)
The 6-foot sections of rail are used for the tie-backs to provide
the counterweight for the system. (4pcs in each of the RGC-
KIT-09, RGC-KIT-18V and RGC-KIT-27V)
The 9-foot sections of rail provide the leading edge protection
and use a stiffener. (X-POST-INT to connect the top/mid rail)
RGC-KIT-09 has 2 pcs of 9-foot pipe and 1 of the X-POST-INT
RGC KIT-18V has 4 pcs of 9-foot pipe and 2 of the X-POST-INT
RGC-KIT-27V has 6 pcs of 9-foot pipe and 3 of the X-POST-INT
HG-KIT-08 has 6 pcs of 4-foot pipe for 3 sides of the hatch and 1
Z-HATCH-SUPPORT for stability
Figure 4: Labelled Components
A-POST-END B-POST-CORNER E-POST-VAR
X-POST-INT Z-Hatch Support
Page 11