LiftEquip TW160, Operating Manual

Page: 106 / 112

6085103100 / 2620-16
BERNSTEIN AG . Hans-Bernstein-Straße 1 . 32457 Porta Westfalica . www.bernstein.eu
Technical modifications and errors excepted.
The technical datasheet corresponds to the technical state as of 2016-10-24 and will not be removed in case of changes.
Page 2 of 2
Technical Data
Mechanical data
Enclosure Thermoplastic, glass fibre reinforced
Cover Thermoplastic, glass fibre reinforced
Actuator plunger (Thermoplastic)
Ambient air temperature -30 °C ... +80 °C
Contact type 1 NC, 1 NO (Zb)
Mechanical life 10 x 10
6
operating cycles
Switching frequency ≤ 100 / min.
Assembly 2 x M4 / 2 x M5 / 2 x M3 front mounting
Connection 4 screw connections (M3,5)
Conductor cross-sections
Solid: 0,5 ... 1,5 mm²
Litz wire with ferrules: 0,5 ... 1,5 mm²
Cable entrance 2 x M16 x 1,5
Weight ≈ 0,08 kg
Installation position operator definable
Protection type IP65 acc. to IEC/EN 60529; DIN VDE 0470 T1
ID for safety engineering
B10d 20 x 10
6
cycles
Standards
VDE 0660 T100, DIN EN 60947-1, IEC 60947-1
VDE 0660 T200, DIN EN 60947-5-1, IEC 60947-5-1
DIN EN ISO 13849-1
EU Conformity
acc. to directive 2014/35/EU
Notes
The degree of protection specified (IP code) applies only to a properly closed protective guard and the use of an equivalent cable gland with
adequate cable.
Actuation
The push bolt actuator is mainly intended to be actuated along its axis.
Side actuation will considerably reduce switch life.
Approvals
C
CSA
US
A300, Q300
CCC