12
2. Fix the steel track to the wall bracket with axis pin. (Fig. 4)
3. Fix garage door opener to the track utilising the U bracket. Do not over tighten
– use 2nm of fastening
force.
4. Fix the opener on ceiling using hanging bracket.
Notice: Make sure the track is horizontal and vertical to the shaft. Make sure the connection of
hanging
bracket
and ceiling is firm enough.
5. Affix the clutch cord.
6. Release the clutch, try to open and close the door by hand. Make sure there is no resistance between
door panel and track.
7. Connect the opener with power and adjust the operation as per instructions below.
Summary of Contents for LA-SDO1
Page 10: ...10 Fig 8 Fig 9 19MM B...
