Lift-Rite,
Tel:
Toll Free from USA: 1-800-558-6012, Greene, NY 13778, Publication Number 1234959D ©2022 Dated 14 Sep 2022
15
Piece Count: Sampling
If an unknown piece weight is to be determined, you may do this by sampling a certain number of
pieces. The number of pieces taken from or placed on the scale determines the accuracy of the
sampling. The total weight of the pieces taken from or placed on the scale for the sampling should
be no less than 9 to 10 lbs. (4.1 to 4.5 kg). The greater the weight difference, the greater accuracy.
The standard sampling amount is 10 pieces, but this number can be increased up to 95 pieces.
•
Press the
key.
•
The display shows “add10”. The “lb.” pointer changes to “pcs”.
•
Take or place 10 pieces from/on the scale and press the ENTER (
) key.
•
The sampling is done and the display shows the total number of pieces on the scale.
Or
•
Press the
key or the
key to change the number of pieces to add.
•
The display shows the new value to add. (For example “add 50”).
•
Take or place 50 pieces from/on the scale and press the ENTER (
) key.
•
The sampling is done and the display shows the total number of pieces on the scale.
To return to the normal weighing mode, press the
key for 3 seconds.
Piece Count: Enter a Piece Weight
•
Press the
key for 3 seconds.
•
The last used piece weight
is shown with the right digit flashing.
•
Press ENTER (
) to accept the old value.
•
The display shows the number of pieces currently on the scale.
Or
•
Change the piece weight value by using the
or
and
keys.
•
The display shows the new piece weight.
•
Press ENTER (
) to accept the new value.
•
The display shows the number of pieces currently on the scale.
To return to the normal weigh mode, press the
key.
