Page 33
Approved Electrodes
The ACT monitoring system comes with ECG cables that have
standard snap connectors for quick and easy connection/removal
to ECG electrodes. To insure maximum safety and performance of
the ACT monitoring system, only use the ECG electrodes supplied
with the ACT monitoring system kit. Alternative electrodes are
available for patients with a history of sensitivity and/allergy to
adhesives. Alternative electrodes can be requested by calling
LifeWatch customer service at 1-800-517-6330.
Skin Preparation
1. Using only scissors, remove any excess hair in the
areas where the diagram (page 35) indicated the
electrodes are to be placed.
2. Wash the skin of the electrode sites on your chest and
abdomen with warm water and mild soap. Be certain
to thoroughly rinse away any soap residue with clean
water.
3. Make sure your skin is clean and completely dry
before proceeding to Step 2. Avoid the use of lotions,
creams, or alcohol wipes at the electrode sites prior to
and during the use of electrodes.
4. Do not apply electrodes to skin that has an open cut
or is already irritated. Apply the electrode in close
proximity to the required location on clean, non-
irritated skin.
Electrode Placement
1. Place the electrodes as shown on page 35.
2. The electrodes should be replaced every 5 days.