18
SECTION 4 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
4.1
4.2
• Insert one end of the
Tie Plate (BLC)
into the slot
on the
Lower Extension Arm (BGP)
as shown.
• Insert the opposite end of the Tie Plate into the slot
on the other
Lower Extension Arm (BGP)
as shown.
BLC
BGP
BGP
4.3
•
Attach the
Lower Extension Arms (BGP)
together with the hardware shown. Use a Socket Wrench to screw the
Thread-Cutting
Bolts (AQB)
through the Lower Extension Arms and the
Tie Plate (BLC)
.
1/2” (≈13 mm)
1/2” (≈13 mm)
AQB
(x2)
AAN
(x2)
WARNING
!
!
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department. Exposed threads
on the end of the Bolt may cause serious injuries.
AQB
AAN
BGP
BGP
BLC
