7
TOOLS AND HARDWARE REQUIRED
• Strike the end of the Pole Assembly on a piece of scrap wood or
cardboard 5–6 times.
1.5
SECTION 1 (CONTINUED)
6x
• Do not strike your feet with the Pole sections, as
serious injury may occur.
!
ABZ
(x2)
• For ease of installation, chuck the head of
the Self-Tapping Screws directly into the
drill, or use a 3/8” Hex Driver
!
• Using a Power Drill, secure the Poles together with
Self-Tapping Screws (ABZ)
.
1.7
6x
ALH
ALF
ALE
ABZ
ABZ
WARNING
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface five to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
• Flip the Pole over and repeat
step 1.5 for the opposite end
of the Pole Assembly.
1.6
(x1)
(x1)
