13
TOOLS AND HARDWARE REQUIRED
SECTION 3 (CONTINUED)
3.1
3.2
• Insert two
Carriage Bolts (EAP)
through the
Rim Pivot Bracket (APY)
as shown.
• Use the 1/2” socket head from the socket head wrench to press one
Push Nut (AAQ)
onto one end of the
Axle
(ABQ)
.
(Not to scale)
EAP
(x2)
APY
(x1)
AAQ
(x1)
ABQ
(x1)
(Not to scale)
EAP
EAP
APY
AAQ
ABQ
1/2” (13 mm)
Socket Head
(x1)
• The Push Nut should rest about 1/8” from the end
of the Axle. If the Push Nut slips on too far, continue
sliding it to the other end of the Axle to remove it
and try again.
!!
