Lifetime POWER LIFT 71281, Owner'S Manual With Assembly Instructions

Page: 10 / 28

10
MJ
MS
Required For This
Page:
w8SFODIFT
1039829
(2)
(2)
(2)
PA
(2)
(1)
1005748
Screwdriver
MJ MS
AL MH
Small holes
Large holes
Tighten all
hardware
securely.
MC
Apply the Height Sticker (AU) so it
wraps around the opposite side of the
pole as the Spring Bracket (AL).
The small notch in the Sticker fits
around the hole in the pole.
AL
AU
8
TP
TP
Align the hole in the Top Pole (TP) with the slot in the
Middle Pole (MP) and slide the Top Pole over the Middle
Pole.
The Screw will spin freely once installed.
*OTFSUBwYw
Screw (PA) through the
small hole in the Top
Pole and into the Middle
Pole.
PA
TP
MP
7
MH
MC
Do not jam the poles together until instructed.
Note: There are two screw holes at the bottom of the pole.
The correct hole will be slightly larger and slightly lower on
the pole.