Lifetime POWER LIFT 71281, Owner'S Manual With Assembly Instructions

Page: 21 / 28

21
34
Place the Wood Block (AJ) on top of the pole and strike with a hammer
TJYPSTFWFOUJNFT
**AT LEAST 2 ADULTS REQUIRED FOR THIS STEP**
AJ
TP
MP
BP
Make sure the Backboard faces the playing surface and align the small hole in the Middle Pole
(MP) with the correct slot in the Bottom Pole (BP). Slide the Middle Pole over the Bottom Pole.
Insert the Pole
Cap (AA) into the
pole.
To ensure that the concrete can fully set,
do not play aggressively on your basketball
system for a week.
BP
MP
PA
*OTFSUUIFSFNBJOJOHwYw4DSFX 1"UISPVHIUIFTNBMMIPMFJOUIF
Middle Pole and into the Bottom Pole.
If the Middle Pole does not completely cover the
slot on the Bottom Pole after seating, DO NOT
COMPLETE ASSEMBLY. Call our Customer Service
Department.
AA
Screwdriver
1005748
Required For This Page:
PA
(1)
Hammer/Mallet
The Screw will spin freely once installed.
TP
Insert the remaining Self-tapping Screw (PB)
directly into the chuck of the Electric Drill and
screw into the Pole at the location shown.
Note: There are two screw holes at the bottom of the pole. The correct hole
will be slightly larger and slightly lower on the pole.
(1)
PB
PB
PB