Lifestand LSR Kid, User Manual

Page: 49 / 66

User Manual LSR Kid
Adjustment
49
The brake mechanism is attached by four screws. The bracket is reversed when
the rear wheels are 20” models and are mounted in position 7 (see page 37).
The air pressure of the tire has a huge impact on the ability of the brake to lock
the wheel. Therefore make sure that the tires have the correct air pressure before
adjusting the brakes.
m
CAUTION!
Brakes
The brakes must be adjusted regularly. Adjustment is also required as soon as
the rear wheel attachments have been moved. With the rear wheels of 20” in posi-
tion 7 (see page 37), the brackets of the brakes needs to be reversed.
Adjusting
1. Undo the two screws (A) holding the brake mechanism on the left and right
hand side of the chair. See fig.
2. Move the brake mechanisms along the chassis frames to the required position.
3. Tighten the two screws (A) on the left and right hand side of the chair. Make
sure the wheels are locked when the brakes are engaged. Perform the adjust-
ment again if needed.
Reversing the bracket
1. Remove the brake and its bracket, they are fitted with four screws (A+B).
2. Turn the bracket 180° and refitt using the four screws (A+B).
3. Adjust the brakes according to description above.
Reversed position Standard position
A
B
A
B