Lifestand LSR Kid, User Manual

Page: 36 / 66

User Manual LSR Kid
Adjustment
36
S
eat depth
The seat depth can be adjusted in 7
fixed stages, from 24-36 cm. There
are two measurements required to
be able to adjust the seat depth
correctly:
•
The length of the thigh - the
length of the thigh in sitting posi-
tion (from the backside to the front
of the knee. (Dimension "D" on
page one of the order form).
• Seat depth - The measurement
from the front of the leg rest to
the plastic plug on the rear of
Adjusting the seat depth.
1 2 3 4 5 6 7
A B
C
Seat depth (measured from the front of
the leg rest to the plastic plug on the rear
of the seat frame)
Position Visible holes (on the
seat frame inner tube)
Straps
Qty.
Seat depth - 24 cm 1 0
3
Seat depth - 26 cm 2 std. 1
Seat depth - 28 cm 3 2
4 Seat depth - 30 cm 4 3
Seat depth - 32 cm 5 4
Seat depth - 34 cm 6 5
5
Seat depth - 36 cm 7 6
the seat frame.
1. Remove the screws (A) securing the setting for the depth of the seat frame
on the left and right hand side of the seat.
2. Remove the back rest hinge on the left and right hand side of the seat, they
are fitted with one screw each. Adjust the number of straps, see table below.
Fit the back rest hinge on the left and right hand side of the seat in the
desired position (C) using the intended screws and nuts. Adjust the depth
of the seat frame by counting how many holes (B) that are visible on the
inner tube, see table and figure below. Secure the required setting using the
screws previously removed.