User Manual LSR Kid
37
Center of gravity
Once the seat depth has been
adjusted, it may be necessary to
adjust the center of gravity. This is
done by moving the mounting for
the rear wheels in 7 fixed positions.
Adjusting the centre of gravity also
requires adjustment of the brakes.
See page 49.
1.
Release the two screws and
nuts on the left and right side
of the chair that hold the rear
wheel mounting in place.
2.
Return the wheel mounting to
the required position.
Secure the wheel mounting
using the two screws and nuts.
Adjustment
If the rear wheel mountings are moved forwards, the center of gravity moves
backwards, which means that the front section of the wheelchair will be lighter
and the wheelchair may more easily tip backwards.
If the rear wheel mountings are moved backwards, the center of gravity moves
forwards, which means that the front section of the wheelchair will be heavier
and the wheelchair will be more stable.
m
CAUTION!
Adjusting the centre of gravity also requires adjustment of the brakes. See page 49.
Adjusting the rear wheel mounting changes the center of gravity and driving
properties of the wheelchair. For this reason, particular attention should be paid
when the user then tries the chair for the first time.
m
WARNING!
1 2 3 4 5 6 7
S
eat width
The seat width can be adjusted in 4 fixed stages, from 28-34 cm. This adjust-
ment must only be performed by authorised technicians, contact your dealer or
Permobil LifeStand service centre.
Summary of Contents for LSR Kid
