Lifestand LSR Kid, User Manual

Page: 32 / 66

User Manual LSR Kid
Adjustment
32
Adjustment
Legrest and footplate
Height & angle
For the best sitting comfort and to achieve the correct position for standing up,
the distance between the footplate and the seat must be adjusted to a suitable
length. It is important that the seat cushion that the customer will then use is also
used when adjusting the height of the footplate.
The length of the legrest is then adjusted so that the user's thighs are parallel with the
seat frame, but a little higher at the front of the cushion. The result will then be suit-
able pressure on the thigh and bottom when sitting, as well as a suitable hip rotation
and extension in the standing position.
The leg rest length adjustment is carried out in 10 fixed stages. The same
screws are used to adjust the angle of the foot plate (to plus or minus 10
degrees). If further adjustment of the leg rest length is needed, the footplate
brackets can be turned up side down, which will enable the foot plate to be set
higher up. See page 33.
1. Remove the foot plate, which is attached by two screws on the left or right
side.
2. Fit the foot plate to the required hole configuration on the leg rest. Fit using
the upper screws.
3. Adjust the foot plate to the required angle and secure with the lower screws.
Adjustment of leg rest length