18
SPEED & RPM value will display by turn in every 6s.
RPM
In START mode, with sensor input, screen display training rotation per minute in 3s;
Without sensor input for 4.6s, the RPM value is 0.
Display range: 0 ~ maximum 999.
SPEED & RPM value will display by turn in every 6s..
CALORIES
Count-up – no preset target, calories will count-up from 0.0.
Count down – with preset target, calories will count down from preset to 0, then system
STOP. And system alarm 8s with 4 sounds in every second.
Display range: 0~999 CAL; Setting range: 0~990CAL
DISTANCE
Count-up – no preset target, distance will count-up from 0.0.
Count down – with preset target, distance will count down from preset to 0, then system
STOP. And system alarm 8s with 4 sounds in every second.
Display range: 0.0~99.9km(ml); Setting range: 0.0~99.0km (ml)
PULSE
With pulse signal input, it will display user heart rate in 7.5s; without pulse Input, PULSE
window display 0 in 6s.
Pulse exceed the preset Target value, console will remind with beep sound.
Display range: P-30~230; Setting range: 0-30~230
WATT
Display power consumption during training. With sensor input, it will display WATT value in
3s; without any signal input, WATT window display 0 in 4.6s.
Display range: 0~999.
MANUAL
Manually adjust workout load level.
PROGRAM
Self-select load level to work out; 12 profiles preset to be selected (P1~P12).
USER
User create his own resistance level profile to workout.
H.R.C.
Target HR training mode.
Four modes for selection: 55%, 75%, 90%, TAG.
WATT
CONSTANT
WATT constant training mode.
OPERATION PROCEDURE:
1. Power on
Connect power (press RESET key for 2s), buzzer sound for 1s and LED will full display 2s (
Drawing 1
), then
display wheel diameter and KM (or ML) in middle window and “E” (or “A”) in CALORIE window (
Drawing 2
). Then
go to user setting mode.
2. User profile setting
2.1.
System default user group is U1(
Drawing 3
), press UP or DOWN to select U1~U4, press MODE button to
confirm. Press “+” or “-” buttons to set SEX (
Drawing 4
), AGE (
Drawing 5
), HEIGHT (
Drawing 6
), WEIGHT
(
Drawing 7
) and confirm by pressing MODE. When finish setting, the system will enter to function selection page
(
Drawing 8
).
2.2.
SEX- Female/Male; AGE- 1~99(default value is last input value); HEIGHT- 100~200CM (default value is last
input value); WEIGHT- 20~150KG (default value is last input value).
Drawing 1
Drawing 2
Summary of Contents for ST-13
Page 5: ...5 3 EXPLODED DIAGRAM...
Page 6: ...6...
