17
6.
COMPUTER OPERATION
BUTTON FUNCTIONS
RECOVERY
To test heart rate recovery status.
MODE
In STOP mode, press this button to select function or confirm all setting values.
PROGRAM
To select workout program.
BODY FAT
To test the Body Fat% (5.0%~ 50%) and BMI (0~50).
+
To increase resistance level, select program or increase function value.
-
To decrease resistance level, select program or decrease function value.
RESET
In STOP mode or setting mode, press it to reverse to main menu.
Hold on pressing this key for 2 seconds, console will reboot and start from user profile
setting mode.
START/STOP To start or stop training.
Stop training by pressing START/STOP key, the computer will remain all the setting values.
When power is on during workout, user can press FAN button to start fan function. Press it
again to shut down.
INCLINE
-Increase the incline level (1~15)
INCLINE
-Decrease the incline level (15~1)
DISPLAY FUNCTION
TIME
Count-up – no preset target, time will count-up from 0:00.
Count down – with preset target, time will count down from preset to 0, then
system STOP. And system alarm 8s with 4 sounds in every second.
Display range: 0:00~99:59; Setting range: 0:00~99:00
SPEED
In START mode, with sensor input, screen display training speed in 3s;
Without sensor input for 4.6s, the SPEED value is 0.
Display range: 0.0 ~ maximum 99.9 KM/H or ML/H.
Summary of Contents for ST-13
Page 5: ...5 3 EXPLODED DIAGRAM...
Page 6: ...6...
