Troubleshooting
E1 System Hardware Error
A system hardware error has been detected.
Action:
Perform the test again. If you get
the same error, please contact your local
customer service representative, details can
be found at www.onetouchstatstrip.com.
E2 Operating Temperature Error
The Meter temperature is outside of the
range for testing. A blood glucose result will
not be obtained.
Action:
Move the meter to an area where
the temperature is acceptable (15°C-40°C
or 59°F-104°F), allow meter to adjust to the
temperature. Repeat the test.
Summary of Contents for OneTouch SS Xpress
