14
How to replace the nozzle
The bottle’s nozzle has been designed to be
non-tasting, replaceable and chew-proof.
• Open the snap-fit lid.
• Pull out the nozzle and discard as
recyclable plastic waste.
1
• Remove the new nozzle from its
packaging and make it wet.
• Align the position dot on the nozzle with
the seam on the screw top and insert
the nozzle firmly.
Helpful tip – Apply a small amount of
silicone grease to the outside of the
nozzle before fitting, this will make the
nozzle easier to fit and use.
Maintaining the pump
The bottle’s pump has been designed for
high workloads. Over time it is possible
for the pumping action to become stiff. To
maintain the pump:
• Unscrew and remove the pump base
from the bottle and empty the bottle of
any water.
• Hold the pump tube in one hand and
with the other hand unscrew the pump
base, pull away and remove from the
pump tube.
2
• Place a small amount of silicone grease
around the black O-ring, which sits on
the top of the pump shaft.
3
• Ensure that the red O-ring is correctly
seated on the pump tube at the base of
the thread.
4
• Place the pump tube over the top of
the pump shaft and re-screw the pump
base.
• Do not over tighten.
2
1
3
4
MAINTENANCE AND CARE
