background image

EN

15

SHELF LIFE 

SHELF LIFE

Standard packaged cartridge 

The bottle can be stored unused for up 

to 3 years from the date of manufacture. 

Priming is an essential step that must be 

performed within 3 years from the date of 

manufacture and before you start to use 

the bottle to drink from.

If stored longer than 3 years the bottle 

membranes will dry out, the nano-filter 

pores will close and the system will shut 

down. 

Hermetically sealed barrier foil 

wrapped cartridge 

A foil wrapped cartridge, if sealed in the 

condition that it was purchased, can be 

stored for up to 10 years from the date 

of manufacture. The extended shelf life 

is due to the use of military grade barrier 

foils, with the lowest moisture vapour 

transition rate available. On opening of the 

foil wrapped packaging, the cartridge can 

be left stored for a further 3 years before 

priming is required. In total, providing a 13 

year shelf life. 

Standard packaged activated carbon 

filter

An activated carbon filter, if sealed in 

its original polythene wrapping, can be 

stored for up to 3 years from the date of 

manufacture. If left unsealed the activated 

carbon filter can be stored for up to 2 

months before expiry. Carbon is a natural 

absorbent, so if left unsealed it will be 

absorbing all pollutants in the air around it.

Hermetically sealed barrier foil 

wrapped activated carbon filter 

A foil wrapped activated carbon filter, 

if sealed in the condition that it was 

purchased, can be stored for up to 10 

years from the date of manufacture. On 

opening of the foil wrapped packaging, 

the activated carbon filter can be stored 

for a further 3 years if sealed in the 

zip lock foil bag it was supplied in. In 

total, providing a 13 year shelf life. If left 

unsealed, the activated carbon filter can 

be stored for up to 2 months before expiry.

Summary of Contents for bottle

























Reviews: